Content - Bomix launches a "3 in 1" aqua mold coating

Bomix launches a "3 in 1" aqua mold coating

10.08.2020|

3 in 1 – water-based, one component IMC system with high flexibility and resistance!

In-Mould-Coatings (IMCs) for integral foam polyurethane parts used in automotive industry, for furniture or especially for medical applications need to fulfil demanding specifications. Requirements such as stability towards disinfectants or scratch and abrasion resistance are a must. At the same time, the coating needs to be flexible as the coating is covering parts such as cushions, seats, armrests or floor mats.

Previous application – 3 components.
Layer 1: 2K clear IMC – generating high resistance
Layer 2: 1K coloured IMC
In total the system consists of 2 coatings and 1 hardener: 3 components.

New application - 1 component.
Bomix combines the above mentioned 3 component system in 1 component only! ADVANTAGES Water-based system Save time and costs – only 1 layer Unlimited pot life Improving workplace safety – removing hardener as critical component PERFORMANCE The system covers a wide range of integral foam parts from flexible (Shore A 20-50) to rigid/semi-rigid (Shore A 50-100). Our experience shows that this system is capable of reaching 70-90% of the performance of a comparable 2K system – depending on specification.

Advantages.

  • Water-based system
  • Save time and costs – only 1 layer
  • Unlimited pot life
  • Improving workplace safety – removing hardener as critical component


Performance.
The system covers a wide range of integral foam parts from flexible (Shore A 20-50) to rigid/semi-rigid (Shore A 50-100). Our experience shows that this system is capable of reaching 70-90% of the performance of a comparable 2K system – depending on specification.

For more information – contact us!
info@bomix.com, Tel.: +49 2504 924 0

Other news from this category:
Berlac Trend Colours: The promised odyssey. -10.06.2021 |00:00
BerlaGuard: antibacterial coating from Berlac with perm... -19.05.2021 |00:00

Footer

URL of this site:

https://www.berlacgroup.com/en/berlac-group/news/single/article/2020/08/10/bomix-launches-a-3-in-1-aqua-mold-coating/?type=0&cHash=147660f8dd01cb66d0791b6f4ab16817