Inhalt - Bomix launches a "3 in 1" aqua mold coating

Bomix launches a "3 in 1" aqua mold coating

10.08.2020|

3 in 1 – water-based, one component IMC system with high flexibility and resistance!

In-Mould-Coatings (IMCs) for integral foam polyurethane parts used in automotive industry, for furniture or especially for medical applications need to fulfil demanding specifications. Requirements such as stability towards disinfectants or scratch and abrasion resistance are a must. At the same time, the coating needs to be flexible as the coating is covering parts such as cushions, seats, armrests or floor mats.

Previous application – 3 components.
Layer 1: 2K clear IMC – generating high resistance
Layer 2: 1K coloured IMC
In total the system consists of 2 coatings and 1 hardener: 3 components.

New application - 1 component.
Bomix combines the above mentioned 3 component system in 1 component only! ADVANTAGES Water-based system Save time and costs – only 1 layer Unlimited pot life Improving workplace safety – removing hardener as critical component PERFORMANCE The system covers a wide range of integral foam parts from flexible (Shore A 20-50) to rigid/semi-rigid (Shore A 50-100). Our experience shows that this system is capable of reaching 70-90% of the performance of a comparable 2K system – depending on specification.

Advantages.

  • Water-based system
  • Save time and costs – only 1 layer
  • Unlimited pot life
  • Improving workplace safety – removing hardener as critical component


Performance.
The system covers a wide range of integral foam parts from flexible (Shore A 20-50) to rigid/semi-rigid (Shore A 50-100). Our experience shows that this system is capable of reaching 70-90% of the performance of a comparable 2K system – depending on specification.

For more information – contact us!
info@bomix.com, Tel.: +49 2504 924 0

Weitere Artikel in dieser Kategorie
Berlac Trend Colours: The promised odyssey -09.06.2021 |00:00
BerlaGuard: antibakterieller Lack von Berlac mit Dauers... -19.05.2021 |00:00

News

Agenda 2020

Messen

Aufgrund der aktuellen Covid-19 Situation verzichten die Unternehmen der Berlac Group im 2020 auf die Teilnahme an Messen. Unsere breitgefächerte Produkte- und Dienstleistungspalette stellen wir Ihnen gerne wieder im 2021 auf unterschiedlichen Plattformen vor.

Betriebsferien

Gerne weisen wir Sie darauf hin, dass die Unternehmen der Berlac Group über die Feiertage vom 24. Dezember 2020 bis einschliesslich 3. Januar 2021 geschlossen bleiben.

 

 

Offene Stellen

Zur Zeit verfügen die Unternehmen der Berlac Group über keine offenen Stellen.

Fusszeile